Cel-Fi Solo with Built in Modem

Description

The Optus Cel-Fi SOLO Smart Signal Booster is designed to solve cellular coverage problems for voice and data. With up to 100dB of gain, it is the most powerful carrier-grade solution available. The Cel-Fi SOLO covers up to 1,500 m² of indoor space per system. Configure with optional donor and server antennas, or expand your coverage with multiple server antennas. The Cel-Fi commitment is to protect the operator’s network, deliver the best cellular performance, and be the easiest solution to install.

The built in Modem allows users to manage/monitor the Solo remotely via the Wave Portal. SIM card/plan not included.

IntelliBoost® Chipset

The Cel-Fi IntelliBoost baseband processor is the first six-core processor designed specifically to optimize the indoor transmission and reception of 3G/4G/LTE wireless signals. With advanced filtering, equalization and echo-cancellation techniques, Cel-Fi’s architecture delivers unprecedented in-building data rates and pervasive 3G/4G/LTE connectivity.

Network Safe

Self-organizing edge intelligence ensures that Cel-Fi SOLO does not interfere with other indoor wireless products such as Wi‑Fi routers, Small Cells and Distributed Antenna Systems (DAS). High speed Automatic Gain Control ensures that Cel‑Fi SOLO is unconditionally network safe and enables more simultaneous calls and higher data speeds.

Cel-Fi WAVE

The Cel-Fi WAVE App is designed for users to activate, manage and troubleshoot the Cel-Fi SOLO. The app connects to the device via Bluetooth and is available on smartphones and tablets. It is globally trusted and built on carrier-grade security. The device data is synced to the WAVE Portal which allows for additional data modeling and reporting. Order the Solo optioned with an built in modem to manage/monitor it remotely vai the Wave Portal.

Quick Installation

The Cel-Fi SOLO can be installed with a range of Antennas to best suit your specific needs. These can be used to get a system up and running in minutes.

Advanced Installation

If you need a more powerful donor antenna you can connect the Cel-Fi SOLO to an outdoor Wideband Directional Antenna. If you need to get coverage to more areas of your building, you can use Splitters and connect to multiple Server Antennas.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Available Frequency Bands (MHz)	Band 1/3/5/8/28L
Frequency Range	2100MHZ, 1800MHz, 850MHz, 900MHz, 700MHz
RF O/P Power	20dB per CH
RF Gain	100dB
RF Connectors	SMA
Power Supply	Solo unit + AC adapter
Ambient Temp. Range	0° to 40°C
Weight (inc. frame)	1.8Kg
Dimensions	158mm(W) x 80mm(D) x 163mm(H)
Output Impedance	50 Ohms
Current Consumption	40W
DC Supply	9.6 to 28.8 VDC via external supply
Frequency – Layered Navigation	Multiband

PDF’s & Downloads

• Solo Data Sheet
• Solo Quick Start Guide