VIGI SP18090 Solar Power Supply System | TP-Link
VIGI SP18090 Solar Power Supply System | TP-Link
$3,199.00
TP-Link VIGI SP18090 Solar Power Supply System
The TP-Link VIGI SP18090 is a powerful 180W solar power supply system designed for off-grid security cameras and network equipment.
Featuring dual 90W solar panels, up to 93.6Ah of lithium battery storage, MPPT charging and weather-resistant construction, it provides reliable power for remote surveillance installations where mains electricity isn’t available.
Ideal for farms, rural properties, construction sites, remote gates and commercial applications.
Special Order
Available on back-order
Available on back-order
Additional information
| Weight | 65 kg |
|---|---|
| Dimensions | 112 × 63 × 50 cm |
TP-Link VIGI SP18090 Solar Power Supply System
180W Solar Power for Off-Grid Security Cameras & Network Devices
The TP-Link VIGI SP18090 Intelligent Solar Power Supply System is a high-capacity solar power solution designed to provide reliable off-grid power for security cameras, network equipment and surveillance installations in locations where mains power is difficult or expensive to access.
Featuring 2 × 90W solar panels, a 93.6Ah lithium battery, intelligent power management and three DC output ports, the VIGI SP18090 is built for remote security applications across Australia.
It is particularly suited to farms, rural properties, construction sites, industrial facilities, remote gates, large outdoor areas and other locations requiring surveillance without conventional mains power.
Key Features
- 180W total solar power – 2 × 90W photovoltaic panels
- 93.6Ah lithium battery capacity – 31.2Ah per battery module
- Three DC power outputs for connected equipment
- MPPT solar charging controller for efficient solar energy harvesting
- Modular design for easier installation and maintenance
- Adjustable solar panel angles – 5°, 15°, 25°, 35°, 45° and 55°
- Intelligent auxiliary heating for cold-weather operation
- IP66 weatherproof system enclosure
- IP67-rated solar panels
- Remote monitoring and management
- Real-time battery and load information
- Over-discharge and temperature protection
- Remote firmware updates and reboot
- Designed for off-grid security and surveillance applications
Reliable Solar Power for Remote Security
Installing security cameras in a remote location can be challenging when there is no convenient mains power supply.
The VIGI SP18090 solar power system provides an integrated solution by combining solar generation, battery storage and intelligent power management into one system.
During daylight hours, the solar panels generate electricity to power connected equipment and recharge the battery. Stored energy can then be used when solar generation is unavailable, helping maintain power for surveillance equipment around the clock.
The system is designed to work with suitable VIGI surveillance and networking equipment, making it an ideal choice for creating an off-grid security camera system.
180W Dual Solar Panel System
The VIGI SP18090 uses two 90W photovoltaic panels, providing 180W of total solar panel capacity.
The panels can be manually positioned at 5°, 15°, 25°, 35°, 45° or 55°, allowing the installation to be adjusted for the site and available sunlight.
Correct panel positioning is important for solar installations, particularly in Australia where sunlight conditions vary significantly between locations and seasons.
High-Capacity 93.6Ah Lithium Battery
The SP18090 can accommodate up to three 31.2Ah lithium battery modules, providing a maximum battery capacity of 93.6Ah at 10.95V.
The modular battery configuration allows the system to be configured according to the requirements of the connected equipment and installation.
TP-Link specifies more than 500 battery cycles, with its published example based on a VIGI C540-4G installation. Actual runtime will depend on the connected equipment, solar exposure, environmental conditions and system configuration.
Intelligent MPPT Solar Charging
The VIGI SP18090 incorporates an MPPT (Maximum Power Point Tracking) charging controller to optimize solar energy collection.
Rather than simply relying on basic solar charging, MPPT technology continuously manages the relationship between the solar panels and battery system to help make effective use of available solar energy.
This is particularly valuable for remote surveillance installations where maintaining battery charge is critical.
Built for Australian Outdoor Conditions
The SP18090 is designed for outdoor deployment, with an IP66 weatherproof rating for the system and IP67 protection for the solar panels.
The system supports operation from -30°C to 60°C when intelligent auxiliary heating is used, helping it operate across a wide range of environmental conditions.
Intelligent auxiliary heating can assist battery operation in low temperatures, with TP-Link specifying heating-supported charging from -30°C to 45°C and discharging from -30°C to 60°C.
Three DC Outputs
The VIGI SP18090 provides three DC power outputs for connected equipment:
- Output 1: 9–12.6V DC / 2A
- Output 2: 9–12.6V DC / 2A
- Output 3: 12V DC / 2A
This makes the system suitable for powering compatible cameras and networking equipment without requiring a conventional AC mains supply.
Always check the voltage and power requirements of your equipment before installation.
Remote Monitoring & Intelligent Management
The VIGI SP18090 isn’t simply a solar panel and battery.
Its intelligent management features allow installers and operators to monitor important system information remotely.
Depending on the configuration, available management features include:
- Battery level monitoring
- Solar generation monitoring
- Real-time load information
- Power consumption statistics
- Three-way load control
- Battery over-discharge protection
- High and low temperature protection
- Remote firmware updates
- Remote reboot and reset
- Schedule management
- Remote message notifications
- Local LAN management
This can reduce the need for unnecessary site visits when managing remote surveillance installations.
Ideal for Off-Grid Security Camera Installations
The VIGI SP18090 is designed for situations where conventional power infrastructure isn’t readily available.
Rural & Farm Security
Monitor farm entrances, sheds, livestock areas, machinery, fences and remote access points without running mains power across large properties.
Construction Sites
Deploy temporary surveillance around construction sites, equipment storage areas, site entrances and perimeter locations where permanent electrical infrastructure may not yet be available.
Industrial & Commercial Sites
Provide power for cameras and network equipment around yards, remote buildings, gates, storage areas and other outdoor locations.
Remote Gates & Entrances
Create surveillance at gates, driveways and access roads located away from the main building or power supply.
Large Outdoor Areas
The solar system can be used as part of a broader surveillance solution for large properties and remote outdoor locations.
Remote Infrastructure Monitoring
The SP18090 can also be considered for suitable networking and monitoring equipment where reliable off-grid power is required.
VIGI SP18090 + 4G Security Camera
The SP18090 is particularly useful when combined with a compatible 4G security camera, allowing surveillance to be installed where neither mains power nor a conventional wired network connection is readily available.
A typical remote surveillance installation can combine:
Solar panels → VIGI SP18090 controller & battery → 4G security camera
This provides a practical foundation for remote video surveillance without trenching power or network cabling across the site.
For larger or more demanding installations, Total Antenna can help determine the appropriate combination of solar capacity, battery storage, camera and connectivity.
VIGI SP18090 Specifications
| Specification | VIGI SP18090 |
|---|---|
| Solar Panel Power | 180W total |
| Solar Panels | 2 × 90W |
| Solar Panel Voltage | 18V |
| Maximum Battery Capacity | 93.6Ah |
| Battery Configuration | Up to 3 × 31.2Ah lithium battery modules |
| Battery Voltage | 10.95V |
| Maximum Output Voltage | 12.6V |
| DC Outputs | 3 |
| Output 1 & 2 | 9–12.6V DC / 2A |
| Output 3 | 12V DC / 2A |
| Solar Charging | MPPT |
| Panel Angle Adjustment | 5° / 15° / 25° / 35° / 45° / 55° |
| Network Interface | 1 × 10/100 Mbps RJ45 |
| System Protection | IP66 |
| Solar Panel Protection | IP67 |
| Operating Temperature | -30°C to 60°C with auxiliary heating |
| Intelligent Auxiliary Heating | Yes |
| Remote Management | Yes |
| Battery Over-Discharge Protection | Yes |
| Remote Firmware Update | Yes |
| Remote Reboot | Yes |
Specifications are based on TP-Link’s published VIGI SP18090 information and may vary by hardware version or regional configuration.
What’s Included?
The VIGI SP18090 system is a modular solar power solution comprising the solar panels, solar mounting hardware, system controller and modular battery system.
The exact battery configuration and supplied components should be confirmed against the current product package before installation.
Why Choose the VIGI SP18090?
If you need to deploy security cameras in a location without reliable mains power, the VIGI SP18090 provides a purpose-built alternative to running electrical cabling to the camera.
Key advantages include:
Large solar capacity
Two 90W panels provide 180W of total photovoltaic capacity.
High battery capacity
Up to 93.6Ah of modular lithium battery storage is available.
Designed for surveillance
The system is intended for use with compatible security and networking equipment.
Outdoor ready
IP66 system protection and IP67 solar panel protection provide weather resistance for outdoor installations.
Intelligent power management
Monitor battery status, solar generation and connected loads.
Flexible installation
Adjustable panel angles help optimize the installation for its location.
Remote management
Monitor and manage the system without always needing to physically access the equipment.
Frequently Asked Questions
What is the VIGI SP18090?
The VIGI SP18090 is an intelligent solar power supply system from TP-Link designed to provide off-grid power for compatible security cameras and network devices. It combines two 90W solar panels, modular lithium battery storage, a solar charging controller and intelligent power management.
How much solar power does the SP18090 provide?
The VIGI SP18090 has 180W of total solar panel capacity, supplied by two 90W photovoltaic panels.
How much battery storage does the VIGI SP18090 have?
The system supports up to 93.6Ah at 10.95V, using three 31.2Ah lithium battery modules.
Can the VIGI SP18090 power security cameras?
Yes, the system is designed to provide DC power for compatible surveillance and networking equipment. TP-Link specifically describes its VIGI solar systems as suitable for VIGI 4G cameras and Omada networking devices. Equipment voltage and power requirements should always be checked before installation.
Is the VIGI SP18090 waterproof?
The system has an IP66 weatherproof rating, while the solar panels have IP67 weatherproof protection.
Can the solar panel angle be adjusted?
Yes. The panels support manual adjustment to 5°, 15°, 25°, 35°, 45° or 55°.
Does the SP18090 work in cold weather?
Yes. The system includes intelligent auxiliary heating technology. TP-Link specifies charging operation down to -30°C and discharging down to -30°C when the auxiliary heating function is used.
Can I monitor the VIGI SP18090 remotely?
Yes. The system provides intelligent management functions including battery level monitoring, solar generation information, load monitoring, power statistics, remote firmware updates and remote reboot.
Does the VIGI SP18090 include a security camera?
No. The SP18090 is the solar power supply system. A compatible security camera, 4G connection or networking equipment needs to be selected separately unless purchased as part of a complete kit.
Is the VIGI SP18090 suitable for farms and rural properties?
Yes. Its off-grid design makes it well suited to remote surveillance applications such as farm entrances, gates, sheds, paddocks, machinery areas and other locations where running mains power may be impractical.
How do I choose the right solar system for my camera?
The required solar and battery capacity depends on the camera’s power consumption, operating schedule, location, available sunlight, network equipment and required autonomy.
For a reliable installation, Total Antenna can help you select the appropriate solar power system and compatible surveillance equipment for your site.
Need Help Designing an Off-Grid Security System?
Choosing the right solar system isn’t simply a matter of selecting the largest panel.
Camera power consumption, 4G/network equipment, battery capacity, solar exposure, mounting position and local environmental conditions all affect system performance.
Contact Total Antenna for advice on the VIGI SP18090 and compatible solar-powered security camera solutions.
Whether you’re protecting a farm, construction site, commercial property, remote gate or large outdoor area, we can help you build a surveillance system designed for the location.
Shop the VIGI SP18090 today or contact Total Antenna for expert advice.
VIGI SP18090 Installation and Support Link




