Its pre-galvanized steel mast has a 44.5mm outer diameter and 1.2mm wall thickness, providing strength and longevity.

Designed with multiple mounting holes on the baseplate, it fits different roof profiles securely and pairs seamlessly with the Starlink Adaptor FB607313 for GEN 3 V4 dishes.

The 1.8-meter mast helps protect your dish by reducing heat reflection from the roof, an important feature for Australia’s intense sun.

The mount includes two telescopic stays for added stability, while cyclone washers and rubber seals create a tight, water-resistant installation.

This roof mount ensures a reliable setup that can withstand tough conditions, offering excellent protection for your antenna and equipment.

Features:

• Mast Length: 1.8 meters for reduced heat reflection and improved dish protection
• Material: Pre-galvanized steel, 44.5mm OD, 1.2mm wall thickness for strength and durability
• Baseplate: Multiple mounting holes for secure fit on various metal roofs
• Stability: Includes two telescopic stays for reinforced support
• Weatherproof: Cyclone washers and rubber seals prevent water ingress
• Compatible: Works with Starlink Adaptor FB607313 for GEN 3 V4 dishes
• Reliable for long-term outdoor installations under tough conditions

Product Information

The post Hills Antenna FB607314 1.8m Metal Roof Mount appeared first on Total Antenna.

It has been designed for use with 90cm and 1.2m satellite dishes and timber framed, metal clad roofs.

It is suitable for installations in wind classifications up to W60 (AS 4055 Wind Classification N5/C3).

Note the special requirements for 1.2m dish installations in wind classifications higher than W50 (AS 4055 Wind Classification N4/C2).

Specifications

• Colour: Silver
• Finish: Galvanised Steel
• Mount Type: Tripod
• Roof Type: Tin
• Warranty: 1

Installation PDF

The post Hills Antenna FB607137C HD Tin Mount appeared first on Total Antenna.

Featuring a 50mm center pole with 2 x high strength adjustable stay arms ensures a solid foundation for your GEN 3 Starlink dish.

The multipurpose base plate allows for mounting on a huge range of roof profiles from commercial, industrial and domestic buildings.

Features

• • Marine Grade 316 Stainless Steel Construction
  • Universal Base plate
  • High wind load stay bars
  • Black Powder Coat Finish
  • Full stainless steel bolt kit

Included with the kit is the Hills GEN 3 Starlink adapter.

The Starlink GEN 3 Pole Adapter has been specifically designed to mount the Starlink GEN 3 V4 Satellite Dish onto almost any pole on the market.

The GEN 3 Starlink adapter is crafted from a single plastic injection Mould using an exclusive material composition. The construction provides an exceptionally strong product that is robust in design and functionality.

The construction of the GEN 3 pole adapter is so durable, it’s been successfully tested to withstand the weight of a 3 tonne truck!

Its formulation ensures durability and reliability in diverse environmental conditions, with superior UV resistance and capacity to weather the most severe temperature changes.

Color matched to the underside of the Starlink GEN 3 V4 Dish,

Mounting is incredibly simple. The Click-In tab creates a secure fitting to the dish, while two M6 stainless steel bolts are used for fastening to the pole.

Features:

•  Suits the Starlink GEN 3 V4 Dish (Click-In tab design)
• Supports a Pole Diameter from 32mm to 50mm
  (32mm to 42mm requires Small Pole Diameter Adapter)
•  Precision injection molded with a proprietary formulation
•  Uses a heavy-duty material with exceptional UV resistance able to withstand severe temperature changes
• 20-degree tilt angle to prevent snow build up in icy weather
•  Brass non-slip bushing molded into the collar
• Weight: 320g

The post Starlink GEN 3 Stainless Steel 316 Tin Roof Mount appeared first on Total Antenna.

If you’re installing Starlink on a tin roof, you need a mount that won’t bend, shake, or damage your roof when the wind picks up.

The Hills Antenna FB607042A Heavy Duty Tin Roof Fleximount is one of the strongest, most reliable mounts available for Starlink dishes across Australia — especially on metal roofs.

Designed and made to Australian standards, this professional-grade triangular Fleximount delivers rock-solid performance for your Starlink system, even in high-wind and coastal areas.

Why Starlink Owners Love the Hills FB607042A:

• Perfect for Starlink Gen 3 V4 Dish – Engineered to securely hold the latest Starlink dish

• Heavy Duty Galvanized Steel – Much stronger than cheap imported mounts

• Minimal Roof Penetration – Smart triangular design spreads the load and reduces the risk of leaks on your tin roof

• Wind Rated – Built to handle strong Australian winds without losing alignment (critical for consistent Starlink speeds)

• Corrosion Resistant – Premium galvanized finish or our Galvanized and Black Powder Coated version fights rust in coastal and harsh environments

• Low Profile & Professional Look – Sits neatly on your roof without looking bulky

• Used by Professional Installers – Trusted for Starlink, NBN Fixed Wireless & satellite installs nationwide

Don’t risk your expensive Starlink dish with flimsy plastic or lightweight mounts that flex and fail in the wind. The Hills FB607042A gives you the confidence that your dish will stay perfectly pointed at the satellites, delivering maximum speed and reliability 24/7.

Whether you’re in regional Victoria, Queensland, Western Australia or anywhere across the country, this is the go-to heavy duty tin roof mount for serious Starlink users who want a permanent, stormproof installation.

Stop worrying about signal drops caused by wind or cheap mounts.

Get the Hills FB607042A Heavy Duty Tin Roof Fleximount — the Australian solution built for Starlink.

Note: The GEN 3 V4 Pole Adapter is NOT Included

Starlink GEN 3 Heavy Duty Tin Roof Mount | Australia

Starlink GEN 3 Heavy Duty Pole Mount

The post Hills FB607042A Heavy Duty Starlink Tin Roof Mount | Gen 3 Ready appeared first on Total Antenna.

Features

• Designed for LL400 Cable
• Three interchangeable blades for versatile cable compability
• Precisely engineered blades for clean and accurate stripping
• User-friendly design with a comfortable grip
• Compact and portable for easy handling and transportation.

The post Hills Antenna BC85422 Three Blade Cable Stripping Tool appeared first on Total Antenna.

Features

• Designed for LL195, RG58, and LL240 Cables
• Three interchangeable blades for versatile cable compability
• Precisely engineered blades for clean and accurate stripping
• User-friendly design with a comfortable grip
• Compact and portable for easy handling and transportation

The post Hills Antenna BC85421 Three Blade Cable Stripping Tool appeared first on Total Antenna.

Kit Contains

• 1 x Crimping Tool (interchangeable angled head)
• 1 x Coaxial Cable Cutter
• 1 x Die (suit LL195, RG58 & LL240 Cables)
• 1 x Die (suit LL400 Cable)
• 1 x Die (suit RG58, RG59, RG62 & RG174 Cables)

The post Hills Antenna BC85420 Communications Installers Tool Kit appeared first on Total Antenna.

Colour: Silver
Mount Type: Accessory
Warranty: 1

The post Hills Antenna FB602392 Mast Extension Kit appeared first on Total Antenna.

Features:

• Suits Strammit or Brownbuilt clamp‐down flat decking
• Non penetrating design
• Can support standard masts without guying.
• Mast sold separately.
• Suits masts up to 40mm in diameter.
• Hot dip galvanized steel
• Foot width 32mm
• Stay thickness 8mm.

Product Information Sheet

The post Hills Antenna Strammit Roof Mount – Wide Foot appeared first on Total Antenna.

The post Digitek 1.5M Heavy Duty Curved Fascia Bracket appeared first on Total Antenna.