Tired of flimsy mounts that wobble in the wind or fail compliance checks? Introducing the Hills Antenna FB607058 Extended Vertical Surface Mount – the genuine, heavy-duty solution trusted by installers across Australia for Starlink, Foxtel, VAST, and NBN satellite dishes.

Why professionals and homeowners choose the Hills Antenna FB607058 every time:

• Officially Dual-Approved – Fully compliant and endorsed for 65 cm and 80 cm Foxtel/VAST dishes, plus NBN satellite installations. No more guessing games or rejection headaches during certification.
• Built Tough for Australian Conditions – Constructed from galvanized steel with a corrosion resistant finish, this mount laughs at rain, salt air, UV exposure, and extreme weather. It’s designed to last for years without rust or degradation.
• Extended Reach for Perfect Alignment – The extended design gives you that crucial extra clearance and elevation on vertical surfaces (masonry, brick, or concrete walls), making it easier to achieve precise satellite pointing – even on tricky building layouts.
• Heavy-Duty Stability – Supports substantial loads with rock-solid mounting. Handles wind classifications up to W50 (65 cm dish) and W41 (80 cm dish) – meaning your dish stays locked in place through storms and high winds.
• Easy, Secure Installation – Adjustable and straightforward to fit to vertical walls. Save time on-site while delivering a clean, professional finish every customer will appreciate.

Whether you’re an installer doing Starlink or Foxtel reconnections, VAST setups in regional areas, NBN satellite broadband jobs, or a homeowner wanting the best foundation for crystal clear reception – the Hills FB607058 delivers unmatched reliability and peace of mind.

Don’t risk signal dropouts or callbacks with cheap alternatives. Choose the mount that’s Australian made tough, compliance approved, and built by Hills, a name synonymous with quality antennas and accessories for decades.

Grab the Hills FB607058 Extended Vertical Surface Mount today and give your next install the strong, dependable base it deserves!

Product Information Sheet

Starlink GEN 3 Heavy Duty Pole Mount

Hills Antenna Tin Roof Tripod Mount and Mast

The post Hills Antenna FB607058 Extended Vertical Surface Mount appeared first on Total Antenna.

FB607314 1.8 Metal Roof Mount:

• Material: Pre-galvanized steel, 44.5mm diameter, 1.2mm wall thickness
• Length: 1.8 meters, reducing heat reflection from the roof and improving performance in Australia’s intense sun
• Mounting Flexibility: Multiple holes on the baseplate for various roof profiles
• Stability: Comes with two telescopic stays for added support

FB607313 Pole Adaptor:

• Compatibility: Tailored for the Starlink GEN 3 V4 Satellite Dish, ensuring a secure fit

Additional Features:

• Cyclone Washers & Rubber Seals: Included to create a tight seal and prevent water ingress

This kit offers a robust and versatile mounting solution, capable of withstanding challenging conditions while protecting your equipment.

The post Hills Antenna 1.8M Starlink Metal Roof Mount appeared first on Total Antenna.

It is 1.4m in length and provides sturdy non-penetrating mounting capability.

Bracket Plane: Roof
Colour: Silver
Finish: Galvanised Steel
Frame Material: Timber
Length: 1.4
Roof Type: Tile
Warranty: 1

Product Information

The post Hills Antenna FB607236 FTA Tile Roof Mount appeared first on Total Antenna.

A universal base plate enables the Gen 2 Starlink mount to be installed on a wide variety of roof profiles, making it suitable for commercial and domestic installations.

The Gen 2 mount ensures solid and discreet platform to mount your Starlink system in high wind load areas.

Select the standard heavy duty galvanized mount or the premium black powder coated version.

The Starlink tin mount fits the original Gen 2 dish by clicking it into place when the mount is installed.

Tin Mount Kit Includes:

• Heavy Duty Galvanized Steel Mount
• Multipurpose base plate to suit a variety of roof profiles.
• Heavy Duty 14G Wood Tek Screws
• Galvanized M8 bolts and washers
• Full installation Instructions

Note: The Starlink Gen 2 satellite dish pictured is not included in the sale.

Starlink Heavy Duty Tile Gutter Mount

Starlink Ground Mount

The post Starlink GEN 2 Heavy Duty Tin Mount appeared first on Total Antenna.

Features:

• Large base plate allowing for adequate mounting
• Malleable tripod legs designed to be bent to match the pitch of the roof
• Product includes a standard 25mm diameter 1200mm mast that will suit most antennas
• Strong all steel materials used
• Welded for robust construction
• Hot dipped galvanized for superior corrosion protection
• Supplied with weatherproof cap.
• Foxtel Approved IPL # F31171

Bracket Plane: Roof
Colour: Silver
Finish: Galvanised Steel
Frame Material: Timber
Length: 1200mm
Mount Type: Tripod
Roof Type: Metal Cladding
Warranty: 1

Product Information Sheet

The post Hills Antenna Tin Roof Tripod Mount and Mast appeared first on Total Antenna.

Installations that will benefit from using this mount are ones that are faced with issues such as areas with high wind speeds or require extra load bearing capacity due to the weight or size of the antenna.

It is designed for applications such as:

• Large free-to-air digital television fringe antennas
• Wireless ISP antennas
• NBN fixed wireless N5/C3 W60

NBN APL Approved MA-2018-000019

Bracket Plane: Roof
Colour: Silver
Finish: Galvabond
Frame Material: Timber
Length: 1.8
Mount Type: Tripod
Roof Type: Metal Cladding
Warranty: 1

The post Hills Antenna 1.8m Tin Tripod Mount appeared first on Total Antenna.

The mast and base bracket is adjustable to suit various applications, making it a versatile mount that suits different roof angles.

The mast is 900mm in length and suits small to medium size free-to-air digital TV antennas. It is made from all steel materials for extra strength and hot dipped galvanised for superior corrosion protection.

Designed and made in Australia.

The post Hills Antenna Adjustable Roof Mount appeared first on Total Antenna.