Specially designed for easy installation on the exterior of caravans, trailers or any outdoor structure, the bulkhead allows you to run a Starlink RJ45 ethernet cable through the wall while maintaining a waterproof seal.

The kit includes

• Bulkhead face plate
• IP68 Rated RJ45 Socket
• IP68 Rated Cable Shroud
• Internal cover plate
• 4 x 304 stainless steel screws

The post Waterproof Ethernet RJ45 Bulkhead appeared first on Total Antenna.

With an all-steel construction, heavy duty stay bars and a 42mm x 2.5mm thick-walled center pole, the heavy-duty pole mount is built in Australia to suit Australian conditions.

Description

• All steel heavy duty galvanized construction.
• Suits the Starlink Gen 2 satellite dish
• Starlink dish simply clicks into place.
• Universal base plate to suit a variety of tin roof profiles.
• Comes in 1m or 1.5m heights.
• Heavy duty 14G wood tek screws
• M8 Galvanized bolts
• Full installation instructions

Note: The starlink dish is for reference only and is not included in the sale.

Starlink Heavy Duty Tin Mount

Hills Antenna Satellite Universal Mount

The post Starlink GEN 2 Heavy Duty Pole Mount appeared first on Total Antenna.

The post Cable Eye Bung appeared first on Total Antenna.

Features:

• The installation site should be chosen so that the dish will not be subjected to accidental impacts that would disrupt its alignment.
• The satellite dish should be mounted so that its center is no higher than 90 cm above the top of the concrete footing.
• Embedment depth of the mounting tube should be no less than 80% of the depth of the concrete footing.
• Insert the reinforcing rod into the base of the mast prior to concreting.
• The required size of the concrete footing is dependent on the soil type and design wind speed at the installation site.
• The use of a rapid setting concrete is recommended.

Note: The Starlink dish pictured is not included.

The post Starlink GEN 2 Ground Mount appeared first on Total Antenna.

No more expensive pole adapters required.

Our inserts are manufactured from tuff ASA plastic which offers extraordinary UV, oxidation, and aging resistance.

ASA plastic provides effective protection against breakage and color degradation when used outdoors for long-term purposes.

The standard Starlink pole adapter is available to suit the mounts listed below.

• Hills FB607042A tin mount (40mm ID)
• Hills FB607237A gutter mount (41.5mm ID)
• Jonsa SBS1 Tin Mount (38mm ID)

or tell us the internal diameter of your pole and we’ll manufacture to suit.

For odd sizing up to 50mm ID please select ‘Custom ID’ and let us know the ID of the pole on check out.

For sizing bigger than 50mm ID please contact us with your specifications.

Note: Please double check the inside diameter of your pole before ordering, if you’re unsure please contact us.

Starlink V2 Panel Mount

Starlink Heavy Duty Tin Mount

Starlink Heavy Duty Pole Mount

The post Starlink Pole Adapter appeared first on Total Antenna.

Designed to be installed in your Caravan, Camper, RV or Motorhome. Cable Eye provides a mozzie proof hole in your wall to run your cable outside to an Antenna or Satellite Dish.

No more running your cable through a window or door. The ‘Eye’ is Specifically designed to fit the Starlink satellite plug of the GEN 2(Dish End) and GEN 3 (Both Ends) and enables you to keep the bugs out while letting the data in.

Made tuff to withstand the harsh Australian environment. Cable Eye’s ASA construction makes it UV and heat resistant.

Our integrated rubber seal keeps the water and dust out while our proprietary silicon plug perfectly hugs your cable to ensure no bugs get in.

Installation is simple and only requires a single hole to be drilled, once complete insert the eye and enjoy.

Don’t risk your Starlink warranty by cutting your cable which other products require you to do.

Cable Eye is a simple pass-through hole to get your cable outside without running it through a window or door.

Cable Eye requires a 32mm hole and suits a wall thickness from 19mm to 35mm.

Note: The Starlink cable pictured is not included.

The post Cable Eye appeared first on Total Antenna.

Made from heavy duty galvanized steel, the Starlink gutter mount is designed to accept the original V2 standard dish by simply clicking it into place once the mount is installed.

Features:

• Designed to be an easily installed mount using only a ladder at the edge of the roof, making it a safer install option.
• No drilling through tiles required.
• For use with a timber framed roof and can cope with differences in rafter spacing width
• Suitable in all Australian regions except C3 cyclone areas
• Can be adapted for metal framed rooves using FB607227 (65cm adapter kit)
• Maximum roof slope 30 degrees, maximum roof height 8.5m above ground level, minimum rafter spacing width 450mm, maximum rafter spacing width 625mm.

Note: The Starlink dish pictured is not included in the sale.

The post Starlink GEN 2 Heavy Duty Tile Gutter Mount appeared first on Total Antenna.

A universal base plate enables the Gen 2 Starlink mount to be installed on a wide variety of roof profiles, making it suitable for commercial and domestic installations.

The Gen 2 mount ensures solid and discreet platform to mount your Starlink system in high wind load areas.

Select the standard heavy duty galvanized mount or the premium black powder coated version.

The Starlink tin mount fits the original Gen 2 dish by clicking it into place when the mount is installed.

Tin Mount Kit Includes:

• Heavy Duty Galvanized Steel Mount
• Multipurpose base plate to suit a variety of roof profiles.
• Heavy Duty 14G Wood Tek Screws
• Galvanized M8 bolts and washers
• Full installation Instructions

Note: The Starlink Gen 2 satellite dish pictured is not included in the sale.

Starlink Heavy Duty Tile Gutter Mount

Starlink Ground Mount

The post Starlink GEN 2 Heavy Duty Tin Mount appeared first on Total Antenna.