Tired of flimsy mounts that wobble in the wind or fail compliance checks? Introducing the Hills Antenna FB607058 Extended Vertical Surface Mount – the genuine, heavy-duty solution trusted by installers across Australia for Starlink, Foxtel, VAST, and NBN satellite dishes.

Why professionals and homeowners choose the Hills Antenna FB607058 every time:

• Officially Dual-Approved – Fully compliant and endorsed for 65 cm and 80 cm Foxtel/VAST dishes, plus NBN satellite installations. No more guessing games or rejection headaches during certification.
• Built Tough for Australian Conditions – Constructed from galvanized steel with a corrosion resistant finish, this mount laughs at rain, salt air, UV exposure, and extreme weather. It’s designed to last for years without rust or degradation.
• Extended Reach for Perfect Alignment – The extended design gives you that crucial extra clearance and elevation on vertical surfaces (masonry, brick, or concrete walls), making it easier to achieve precise satellite pointing – even on tricky building layouts.
• Heavy-Duty Stability – Supports substantial loads with rock-solid mounting. Handles wind classifications up to W50 (65 cm dish) and W41 (80 cm dish) – meaning your dish stays locked in place through storms and high winds.
• Easy, Secure Installation – Adjustable and straightforward to fit to vertical walls. Save time on-site while delivering a clean, professional finish every customer will appreciate.

Whether you’re an installer doing Starlink or Foxtel reconnections, VAST setups in regional areas, NBN satellite broadband jobs, or a homeowner wanting the best foundation for crystal clear reception – the Hills FB607058 delivers unmatched reliability and peace of mind.

Don’t risk signal dropouts or callbacks with cheap alternatives. Choose the mount that’s Australian made tough, compliance approved, and built by Hills, a name synonymous with quality antennas and accessories for decades.

Grab the Hills FB607058 Extended Vertical Surface Mount today and give your next install the strong, dependable base it deserves!

Product Information Sheet

Starlink GEN 3 Heavy Duty Pole Mount

Hills Antenna Tin Roof Tripod Mount and Mast

The post Hills Antenna FB607058 Extended Vertical Surface Mount appeared first on Total Antenna.

Looking for a heavy-duty Hills Antenna FB607314 1.8m Metal Roof Mount that delivers rock solid performance on tin, Colorbond, or metal roofs?

Engineered for Australian conditions, this pre-galvanized steel mount is the go-to choice for professional installers and homeowners needing a durable, weatherproof solution for TV antennas, satellite dishes, and Starlink systems.

✅ In stock now – Ships fast Australia wide from Total Antenna

Price: Only $89 (or bundle with Starlink adaptor for complete kit)

Why Choose the Hills FB607314 1.8m Metal Roof Mount?

• Built Tough for Australian Weather: Constructed from premium pre-galvanized steel with a 1.8m mast (44.5mm OD, 1.2mm wall thickness) and 2.5mm thick HDG baseplate. It withstands high winds, intense sun, and heavy rain.
• Versatile Metal Roof Compatibility: Multiple mounting holes on the baseplate ensure a secure fit on most tin/Colorbond roof profiles.
• Superior Stability: Includes two telescopic stays for extra reinforcement, plus cyclone washers and rubber seals for a watertight installation.
• Starlink Ready: Pairs perfectly with the FB607313 pole adaptor (available in kits) to elevate your Starlink Gen 3 dish and reduce roof heat reflection.
• Proven Performance: 1.8m height protects equipment from extreme roof temperatures while delivering clear signal lines.

Real-World Specs:

• Mast: 1800mm (L) x 44.5mm (OD)
• Stays: Outer 1060mm x 25mm | Inner 1060mm x 20.5mm
• Weight: Approx. 6kg
• Material: Pre-galvanized steel mast & stays | Heavy-duty mild steel base

Benefits That Matter

• Better Signal & Equipment Protection — Elevated mount minimizes heat buildup from metal roofs, ideal for hot Australian summers.
• Quick & Secure Install — Comprehensive hardware kit (bolts, nuts, self-tapping screws, washers & seals) included.
• Long-Lasting Durability — Corrosion resistant galvanizing for years of worry-free outdoor use.
• Multi-Purpose — Perfect for TV antennas, Foxtel, satellite dishes, and Starlink on metal roofs.

Frequently Asked Questions (FAQ)

Q: Is the Hills FB607314 suitable for Starlink?

A: Yes! It works excellently with Starlink Gen 3 V4 (Standard 4) when paired with the official FB607313 pole adaptor. The 1.8m height helps optimize performance and reduce heat issues.

Q: Will it fit my Color bond or tin roof?

A: Absolutely. The flexible baseplate with multiple holes accommodates a wide range of metal roof profiles.

Q: How stable is this mount in high winds?

A: Extremely stable. The telescopic stays and cyclone-rated hardware provide reinforced support for demanding conditions.

Q: What’s included in the box?

A: 1.8m mast, metal roof baseplate, 2x telescopic stays, cyclone washers, rubber seals, bolts, nuts, and self-tapping screws.

Q: Is it easy to install?

A: Yes – designed for professional and confident DIY installers. Full instructions and product sheets are available.

Q: Do you ship Australia-wide?

A: Fast shipping from Total Antenna across Australia. Contact us on 0417 875 151 for bulk or trade pricing.

Ready to Secure Your Signal? Order your Hills Antenna FB607314 1.8m Metal Roof Mount today for only $89 and enjoy fast delivery. Trusted by installers nationwide for TV antennas, satellite, and Starlink setups on metal roofs.

Starlink Gen 3 Pole Adapter Australia | Best V4 Mount for Fast Installation – Total Antenna

Starlink GEN 3 V4 Heavy Duty Tin Roof Mount | Australia

Starlink Gen 3 V4 Tile Gutter Mount – No Tile Penetration, Heavy Duty Australian Solution

The post Hills Antenna FB607314 1.8m Metal Roof Mount – Premium Tin Roof Antenna & Starlink Mount appeared first on Total Antenna.

It has been designed for use with 90cm and 1.2m satellite dishes and timber framed, metal clad roofs.

It is suitable for installations in wind classifications up to W60 (AS 4055 Wind Classification N5/C3).

Note the special requirements for 1.2m dish installations in wind classifications higher than W50 (AS 4055 Wind Classification N4/C2).

Specifications

• Colour: Silver
• Finish: Galvanised Steel
• Mount Type: Tripod
• Roof Type: Tin
• Warranty: 1

Installation PDF

The post Hills Antenna FB607137C HD Tin Mount appeared first on Total Antenna.

If you’re installing Starlink on a tin roof, you need a mount that won’t bend, shake, or damage your roof when the wind picks up.

The Hills Antenna FB607042A Heavy Duty Tin Roof Fleximount is one of the strongest, most reliable mounts available for Starlink dishes across Australia — especially on metal roofs.

Designed and made to Australian standards, this professional-grade triangular Fleximount delivers rock-solid performance for your Starlink system, even in high-wind and coastal areas.

Why Starlink Owners Love the Hills FB607042A:

• Perfect for Starlink Gen 3 V4 Dish – Engineered to securely hold the latest Starlink dish

• Heavy Duty Galvanized Steel – Much stronger than cheap imported mounts

• Minimal Roof Penetration – Smart triangular design spreads the load and reduces the risk of leaks on your tin roof

• Wind Rated – Built to handle strong Australian winds without losing alignment (critical for consistent Starlink speeds)

• Corrosion Resistant – Premium galvanized finish or our Galvanized and Black Powder Coated version fights rust in coastal and harsh environments

• Low Profile & Professional Look – Sits neatly on your roof without looking bulky

• Used by Professional Installers – Trusted for Starlink, NBN Fixed Wireless & satellite installs nationwide

Don’t risk your expensive Starlink dish with flimsy plastic or lightweight mounts that flex and fail in the wind. The Hills FB607042A gives you the confidence that your dish will stay perfectly pointed at the satellites, delivering maximum speed and reliability 24/7.

Whether you’re in regional Victoria, Queensland, Western Australia or anywhere across the country, this is the go-to heavy duty tin roof mount for serious Starlink users who want a permanent, stormproof installation.

Stop worrying about signal drops caused by wind or cheap mounts.

Get the Hills FB607042A Heavy Duty Tin Roof Fleximount — the Australian solution built for Starlink.

Note: The GEN 3 V4 Pole Adapter is NOT Included

Starlink GEN 3 Heavy Duty Tin Roof Mount | Australia

Starlink GEN 3 Heavy Duty Pole Mount

The post Hills FB607042A Heavy Duty Starlink Tin Roof Mount | Gen 3 Ready appeared first on Total Antenna.

It is 1.4m in length and provides sturdy non-penetrating mounting capability.

Bracket Plane: Roof
Colour: Silver
Finish: Galvanised Steel
Frame Material: Timber
Length: 1.4
Roof Type: Tile
Warranty: 1

Product Information

The post Hills Antenna FB607236 FTA Tile Roof Mount appeared first on Total Antenna.

With an all-steel construction, heavy duty stay bars and a 42mm x 2.5mm thick-walled center pole, the heavy-duty pole mount is built in Australia to suit Australian conditions.

Description

• All steel heavy duty galvanized construction.
• Suits the Starlink Gen 2 satellite dish
• Starlink dish simply clicks into place.
• Universal base plate to suit a variety of tin roof profiles.
• Comes in 1m or 1.5m heights.
• Heavy duty 14G wood tek screws
• M8 Galvanized bolts
• Full installation instructions

Note: The starlink dish is for reference only and is not included in the sale.

Starlink Heavy Duty Tin Mount

Hills Antenna Satellite Universal Mount

The post Starlink GEN 2 Heavy Duty Pole Mount appeared first on Total Antenna.

The post Cable Eye Bung appeared first on Total Antenna.

Colour: Silver
Mount Type: Accessory
Warranty: 1

The post Hills Antenna FB602392 Mast Extension Kit appeared first on Total Antenna.

The post Digitek Chimney Kit Single Strap – Galvanized appeared first on Total Antenna.

The post Digitek Chimney Kit Double Strap – Galvanized appeared first on Total Antenna.